ProductPromotion
Logo

C Programming

made by https://0x3d.site

GitHub - WolfgangSt/libelf: libelf
libelf. Contribute to WolfgangSt/libelf development by creating an account on GitHub.
Visit Site

GitHub - WolfgangSt/libelf: libelf

GitHub - WolfgangSt/libelf: libelf

This is the public release of libelf-0.8.12, a free ELF object file access library. If you have problems with applications that use libelf and work with the commercial (SVR4, Solaris) version but not with this one, please contact me.

IMPORTANT NOTE: If you have libelf-0.5.2 installed, you probably have a file .../include/elf.h that contains the single line ``#include <libelf/elf.h>''. REMOVE THIS FILE BEFORE YOU RUN configure.

Installation is straightforward - the package is autoconf'ed. Just do cd libelf-0.8.12; ./configure; make; make install''. Header files will be installed in .../include/libelf/. If your system does not provide its own versions of libelf.h, nlist.h or gelf.h, make install'' will add the missing headers. If you prefer not to have these files installed in /usr/include, use --disable-compat'' and add -I /usr/include/libelf'' to your CFLAGS when compiling libelf-based programs.

Note to distribution makers: You can install libelf in a separate root hierarchy by using the command make instroot=/my/root install''. You should also use the --enable-compat'' configure option in that case, or run ``make instroot=/my/root install-compat'' manually, to install all the required header files.

If you are running Linux with libc 5.* as the default C library, and you plan to use the 64-bit functions, you must either use -I.../include/libelf'', or remove /usr/include/libelf.h and use --enable-compat'' when running configure. Libc 6.* (aka glibc2) doesn't have its own <libelf.h>, <nlist.h> or <gelf.h>.

You need an ANSI/ISO C compiler to build libelf. Gcc is optimal.

On some systems (in particular, Solaris and all variants of Linux), make'' will try to build a shared library. If you run into problems on your system, please pass --disable-shared'' to configure. If you build a shared library and want it to be installed as libelf-0.8.12.so'' rather than libelf.so.0.8.12'', please use ./configure --enable-gnu-names''. Other files, e.g. libelf.so'' and ``libelf.so.0'' are NOT affected.

Another configure option, ``--enable-debug'', adds debugging code to libelf; if you don't run into problems, you will probably not need it.

When creating an ELF shared library, it is possible to add references to other shared libraries in the DYNAMIC section of the resulting file. The make variable DEPSHLIBS contains a list of libraries to add. It is set to -lc'' on Linux systems, and empty otherwise. To override this setting, use something like make DEPSHLIBS="-la -lb"''. For Linux, `-lc' is included automagically.

NLS is available and enabled by default. To turn it off, pass the ``--disable-nls'' option to configure.

Libelf can use gettext or catgets for accessing message catalogs. If gettext is available AND is part of libc (i.e. not in a separate library), it will be used. Otherwise, configure will look for catgets. If you have gettext in a separate library and want to use it, you should pass the library's name to configure, e.g. ``LIBS=-lintl ./configure''. Note that you MUST link your libelf-based applications with -lintl then, which is probably not what you want, or change the DEPSHLIBS variable described above (in case you're building a shared library).

If you have GNU gettext 0.10 installed on your system, and if GNU gettext runs on top of the catgets interface (rather old Linux systems, using libc5), configure will refuse to use it and use catgets instead. If you absolutely want to use GNU gettext, go ahead and rebuild it (which is IMHO a good idea in general in this case):

cd .../gettext-0.10
ac_cv_func_catgets=no ac_cv_func_gettext=no ./configure
make
make install

After that, return to the libelf build directory, remove config.cache, and start over.

*** Large File Support (LFS) applications ***

Some 32-bit systems support files that are larger than the address space of the architecture. On these, the `off_t' data type may have 32 or 64 bits, depending on the API you choose. Since off_t is also part of the libelf API, in particular the Elf_Data and Elf_Arhdr structures, an application compiled with large file support will need a version of libelf that has also been compiled with LFS; otherwise, it won't work correctly. Similarly, a program compiled without LFS needs a library compiled without LFS.

Note that libelf is currently unable to process large files on 32-bit architectures, whether you compile it for LFS or not, for the simple reason that the files won't fit into the processes' address space. Therefore, libelf is compiled without LFS by default. It can of course read and write ELF files for 64-bit architectures, but they will be limited in length on a 32-bit system.

You may compile libelf with large file support by setting CPPFLAGS at configuration time:

CPPFLAGS=`getconf LFS_CFLAGS` ./configure

But I really, really recommend you don't, because it breaks binary compatibility with existing libelf based applications.

*** 64-bit support ***

Starting with libelf-0.7.0, libelf also supports 64-bit ELF files. This is enabled by default unless your system (or your compiler) does not support 64-bit integers, or lacks 64-bit declarations in <elf.h>. If you have problems building with 64-bit support, please do

./configure --disable-elf64

for the moment, and contact me. Please note that I haven't tested 64-bit support much. There are still some unresolved problems, e.g. IRIX uses different Elf64_Rel and Elf64_Rela structures (they replaced the r_info member), and the enumeration values for Elf_Type differ from the commercial (SVR4) implementation of libelf - they broke binary compatibility for no good reason, and I'm not willing to follow their footsteps. The result is that libelf-0.7.* ist upward compatible with libelf-0.6.4 (as it should be) but INCOMPATIBLE WITH SVR4 LIBELF. If you have both versions installed, you'd better make sure that you link with the library that matches the <libelf.h> you're #include'ing.

*** Symbol Versioning ***

Libelf >= 0.8.0 supports the data structures and definitions used for symbol versioning on Solaris and Linux, in particular, the Elfxx_Verdef, Elfxx_Verdaux, Elfxx_Verneed, Elfxx_Vernaux and Elfxx_Versym structures and the SHT_XXX_verdef, SHT_XXX_verneed and SHT_XXX_versym section types (where xx' is either 32' or 64', and XXX' is either SUNW' or GNU'). Libelf now translates versioning sections to/from their external representation properly (earlier versions left them in `raw' format, with the data type set to ELF_T_BYTE). This may cause problems on systems which use the same (OS-specific) section types for different purposes. The configure program tries to figure out if your OS uses versioning; if that check fails, you can use

./configure --disable-versioning

to turn off versioning translation support.

*** W32 Support ***

There is now some support for building on W32 systems (requires Microsoft VC++). In order to build a W32 DLL, cd into the `lib' subdirectory, edit build.bat if necessary (it needs the path to your compiler binaries) and run it. If you're lucky, libelf.dll and the import/export libraries will be built. If not, please drop me a line.

I tested it on XP Pro (SP2), using VC++ 2005 Express Edition. Apparently, Visual Studio .NET 2003 works fine as well.

Various notes regarding the W32 port:

- When you open() an ELF file, remember to use the O_BINARY flag.
- You may have to add /MD to the linker command line.

*** Missing things ***

* There is no documentation.  You can use the Solaris
  manpages instead (available at http://docs.sun.com/).
  The ELF file format is described in several places;
  among them Suns "Linker and Libraries Guide" and the
  "System V Application Binary Interface" documents;
  http://www.caldera.com/developer/devspecs/gabi41.pdf and
  http://www.caldera.com/developer/gabi/ are probably good
  starting points. Processor-specific documentation is spread
  across a number of `Processor Supplement' documents, one
  for each architecture; you'll have to use a search engine to
  find them.

* The COFF file format is not understood. This is so obsolete
  that it will probably never be implemented.

* nlist(3) is incomplete; the n_type and n_sclass
  members of struct nl are set to zero even if type
  (that is, debug) information is available.

* Libelf does not translate Solaris' `Move' and `Syminfo'
  sections. You can read them using elf_getdata(), but you'll
  only get raw (untranslated) bytes.

Changes since 0.8.11:

* Due to some unfortunate confusion, the elf_getphnum(),
  elf_getshnum() and elf_getshstrndx() are not compatible
  between libelf implementations. Therefore, the developers
  decided to replace them with new functions: elf_getphdrnum(),
  elf_getshdrnum() and elf_getshdrstrndx(), which will always
  return -1 on failure and 0 on success. Code using the old
  interface should be upgraded to increase portability.

Changes since 0.8.10:

* Fixed a bug in elf_rawfile().
* If you use ELF_F_LAYOUT together with ELF_F_LAYOUT_OVERLAP,
  elf_update() will now tolerate overlapping sections.

Changes since 0.8.9:

* Ported to QNX Neutrino.
* Fixed Windows build errors.
* Parallel (make -j) installation should work now.

* It's now possible to enable and disable select sanity checks
  libelf performs. Currently, this affects the "NUL terminated
  string table entry" check performed in elf_strptr(). By
  default, the function will return an error if the string
  requested is not properly terminated - because some
  applications might dump core otherwise. If you configure
  libelf with `--disable-sanity-checks', however, the check
  (and, in the future, probably others as well) is disabled
  by default. You can still turn it on and off at runtime by
  setting the LIBELF_SANITY_CHECKS environment variable to
  an integer value:

      # disable all sanity checks
      export LIBELF_SANITY_CHECKS=0

      # enable all sanity checks
      export LIBELF_SANITY_CHECKS=-1

  Each bit of the value corresponds to a particular check,
  so you could use LIBELF_SANITY_CHECKS=1 to enable only
  the elf_strptr() check. You may also use a value in hex
  (0x...) or octal (0...) format.

Changes since 0.8.8:

* Improved translator for symbol versioning sections.
* The W32 library is now built in the `lib' subdirectory.
* Windows DLLs should work now.

Changes since 0.8.6:

* added elf_getphnum().
* added elf_getshnum().
* added elf_getshstrndx().
* added elfx_update_shstrndx().
* handle interrupted reads/writes more gracefully.
* added (partial) support for unusual e_[ps]hentsize values.
* fixed the bugs introduced in 0.8.7.

Changes since 0.8.5:

* added W32 support.
* added workaround for alignment errors in archive members.
* my email address has changed again ;)

Changes since 0.8.4:

* elf_strptr() should now work more safely with fragmented
  or badly formatted string tables.

Changes since 0.8.3:

* Fixed a bug in elf_update() that was introduced in 0.8.3.

Changes since 0.8.2:

* Should compile on MacOSX now.

* Can read and write files with more than 65280 sections

* Tries to handle 64-bit ELF files that use 8-byte hash table
  entries. In particular, libelf tries to guess the data type in
  elf_getdata(), and doesn't override sh_entsize in elf_update()
  any longer. If you want the library to pick the entry size,
  you must set its value to 0 before you call elf_update().

* No longer dumps core in elf_update() when a versioning section
  has no data. Instead, it returns an error message. Note that
  you're supposed to provide a valid d_buf for any section, unless
  it's empty or has SHT_NOBITS type.

* Building a shared library is now the default (if supported).

Changes since 0.8.0:

* Corrected typo in lib/{32,64}.xlatetof.c that sometimes
  caused a compilation failure.

* Use open(name, O_RDONLY|O_BINARY) in lib/nlist.c.

Changes since 0.7.0:

* I implemented the gelf_* interface, as found on Solaris.
  I don't know whether it's compatible -- the Solaris manpage
  isn't very specific, so I had to guess return values etc. in
  some cases.

* Added elf{32,64}_checksum (supposed to be compatible with
  Solaris).

* Added symbol versioning support.

Changes since 0.6.4:

* Fixed configure for IRIX systems
* Added check for truncated archive members
* Added check for misaligned SHDR/PHDR tables
* Support for building libelf together with GNU libc
* Added elf_memory(3)
* Added 64-bit support

Changes since 0.5.2:

* some bug fixes
* mmap support
* new directory layout
* There is a new function, elf_delscn(), that deletes
  a section from an ELF file. It also adjusts the
  sh_link and sh_info members in the section header
  table, if (and ONLY if) the ELF standard indicates
  that these values are section indices. References
  to the deleted section will be cleared, so be careful.
* my email address has changed ;)

Where to get libelf:

ftp://ftp.ibiblio.org/pub/Linux/libs/
http://www.mr511.de/software/

Michael "Tired" Riepe [email protected]

More Resources
to explore the angular.

mail [email protected] to add your project or resources here 🔥.

Related Articles
to learn about angular.

FAQ's
to learn more about Angular JS.

mail [email protected] to add more queries here 🔍.

More Sites
to check out once you're finished browsing here.

0x3d
https://www.0x3d.site/
0x3d is designed for aggregating information.
NodeJS
https://nodejs.0x3d.site/
NodeJS Online Directory
Cross Platform
https://cross-platform.0x3d.site/
Cross Platform Online Directory
Open Source
https://open-source.0x3d.site/
Open Source Online Directory
Analytics
https://analytics.0x3d.site/
Analytics Online Directory
JavaScript
https://javascript.0x3d.site/
JavaScript Online Directory
GoLang
https://golang.0x3d.site/
GoLang Online Directory
Python
https://python.0x3d.site/
Python Online Directory
Swift
https://swift.0x3d.site/
Swift Online Directory
Rust
https://rust.0x3d.site/
Rust Online Directory
Scala
https://scala.0x3d.site/
Scala Online Directory
Ruby
https://ruby.0x3d.site/
Ruby Online Directory
Clojure
https://clojure.0x3d.site/
Clojure Online Directory
Elixir
https://elixir.0x3d.site/
Elixir Online Directory
Elm
https://elm.0x3d.site/
Elm Online Directory
Lua
https://lua.0x3d.site/
Lua Online Directory
C Programming
https://c-programming.0x3d.site/
C Programming Online Directory
C++ Programming
https://cpp-programming.0x3d.site/
C++ Programming Online Directory
R Programming
https://r-programming.0x3d.site/
R Programming Online Directory
Perl
https://perl.0x3d.site/
Perl Online Directory
Java
https://java.0x3d.site/
Java Online Directory
Kotlin
https://kotlin.0x3d.site/
Kotlin Online Directory
PHP
https://php.0x3d.site/
PHP Online Directory
React JS
https://react.0x3d.site/
React JS Online Directory
Angular
https://angular.0x3d.site/
Angular JS Online Directory